Meltham train station
Midland Line, Airport Line and Ellenbrook Line · Greater Perth
Meltham station
Meltham is a Perth train station where the Midland Line, Airport Line and Ellenbrook Line run through here. More than one line uses this corridor, which means a train every few minutes at busy times. It sits in Greater Perth, around 3 minutes from central Perth and the Free Transit Zone.
Meltham is served by the Midland Line, Airport Line and Ellenbrook Line, which share the tracks along this corridor, so you can change between them here by taking the next train on the platform you are on. It lies in Greater Perth, one of the 73 train stations beyond central Perth. On the Midland Line it is stop 7 of 15 from Perth: about 14 min more to Midland and 8 min back to Perth. To Perth in the city: 8 min on the Midland Line.
Into the city from Meltham
A trip into central Perth takes about 3 minutes from here, into the free central zone. It is estimated from the distance between stations, so use it as a guide and check the times above for the real schedule.
Changing lines at Meltham
Meltham timetable
Trains call at Meltham about every 10 to 15 minutes through the day, with more trains at peak times — more often on weekdays and at the peaks, less often in the evening and at weekends. Here is how often each line runs by day, and the first and last train each way; for the full timetable on the day you travel, see the timetable.
How often trains run
| Line | Weekdays | Saturdays | Sundays & holidays |
|---|---|---|---|
| MidMidland Line | every 8 min (4 at peak) | every 3 min | every 7 min (3 at peak) |
| AirAirport Line | every 12 min | every 15 min | every 15 min |
| EllEllenbrook Line | every 12 min | every 15 min | every 15 min |
First and last train
Accessibility at Meltham
Like the rest of the Transperth network, Meltham was built to be stepped onto rather than up into: lift or ramp access to the platform and level boarding onto the trains. Tactile paving marks the platform edge.
Changing between the Midland Line, Airport Line and Ellenbrook Line here stays step-free — you move between platforms without using stairs.
For live lift status, see the accessibility page.
Station facilities
- PlatformsServed by Midland Line, Airport Line and Ellenbrook Line, with departure screens and clear signage.
- Tickets & SmartRiderSmartRider readers at the entrance and ticket machines for cash or card.
- Step-freeNo stairs needed: lift or ramp to the platform and a level step onto the train.
- Help & safetyPlatform help points, CCTV and station information.
- InterchangeChange between the Midland Line, Airport Line and Ellenbrook Line here without leaving the station.
- Getting thereConnecting buses, and at many outer stations a park-and-ride or bike parking — check Transperth.
For the full facilities at Meltham, including parking and opening hours, see Transperth.
What is near Meltham
Notable places within a short walk, from OpenStreetMap.
Places and distances from OpenStreetMap contributors, licensed under ODbL. Walking minutes are an estimate at 4.8 km/h, not an operator figure.
Frequently asked questions about Meltham
Monday to Friday from 05:18 to 02:24. On Saturdays until 02:24.
Several lines call here and share the tracks along this corridor, so trains come more often than on any one line — roughly every few minutes at the peaks. Each line on its own runs about every 10 to 15 minutes. Early mornings, late evenings and Sundays are quieter.
Yes. The Midland Line, Airport Line and Ellenbrook Line share the tracks here, so you change by taking the next train on the platform you are on. Perth and Perth Underground in the city are where all the lines meet.
To Perth, about 8 min on the Midland Line, with no change.
Transperth fares go by zones, from about $2.20–$5.20; tag a SmartRider on and off for the cheapest price, and the central city is free. See tickets and fares.
Greater Perth, in greater Perth, beyond the central city.
